Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Curtis Roby

Düzenleme onaylandı tarafından Curtis Roby

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Using a #000 Phillips head screwdriver, remove the 3mm screw holding the circuit board in place.
-[* black] Remove any tape on the circuit board and screen. It is unnecessary and can be thrown away.
-[* orange] Using Tweezers, unplug the wires from the circuit board and remove it.
+[* red] Remove the 3mm screw holding the circuit board in place using a #000 Phillips head screwdriver.
+[* black] Remove any leftover tape on the circuit board and screen.
+[* orange] Unplug and remove the wires from the circuit board using a set of Tweezers.