Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Sarah Logue

Düzenleme onaylandı tarafından Sarah Logue

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] First flip the black tab where the front LCD screen connects to the circuit board.
-[* orange] Then pull the tape connection to disconnect the front LCD screen from the circuit board.
+[* red] Flip the black tab where the front LCD screen connects to the circuit board.
+[* orange] Pull the tape connection to disconnect the front LCD screen from the circuit board.
[* icon_note] You can do this easily with your fingers.
-[* black] Finally pull the front LCD screen from the front of the camera to remove it.
+[* yellow] Remove the front LCD screen from the front of the camera.