Turtle Beach PX22 Microphone Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: James de Iturrondo — 23 Nis 2015

Düzenleme onaylandı tarafından James de Iturrondo

	[* black] Apply heat to the white and copper colored wires on the circuit board with a heat gun.
	[* black] Insert the new microphone and solder the wires into the correct positions.
+	[* black] Pull the excess microphone wire back into the speaker housing.
+	[* black] Use the Philips #2 screwdriver to replace the screw and fix the microphone.
+	[* icon_note] Hold the microphone neck so that it does no rotate when screwing.