How to Patch a Hole in a Bicycle Tube 5 No'lu Adım Geçmişi

5. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb — 14 Kas 2017

Düzenleme onaylandı tarafından Adam O'Camb

	[* black] Grind the location of the hole slightly until the surface feels a little rough.
-	[* black] Next, apply a thin coat of the rubber cement ~~to an area that is~~ about the same size of the patch ~~to the location of the hole~~.
-	[* black] For best results wait until the rubber cement is ~~try~~ to the touch~~. 3~~ minutes ~~or more~~. ~~It does not matter it airing too long.~~
+	[* black] Next, apply a thin coat of the rubber cement around the hole. The coat of cement should be about the same size as the patch.
+	[* black] For best results wait until the rubber cement is dry to the touch—around three minutes.
	[* black] Finally, peel off the back of the patch, place it over the area of rubber cement with the hole centered, and then apply pressure with thumb until rubber cement is dry.