5. Adımdaki Değişiklikler
Düzenleyen: Isabel —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Grind the location of the hole slightly until the surface feels a little rough. | |
| [* black] Next, apply a thin coat of the rubber cement to an area that is about the same size of the patch to the location of the hole. | |
| + | [* black] For best results wait until the rubber cement is try to the touch. 3 minutes or more. It does not matter it airing too long. |
| [* black] Finally, peel off the back of the patch, place it over the area of rubber cement with the hole centered, and then apply pressure with thumb until rubber cement is dry. |