3. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel. | |
| - | [* icon_note] |
| - | [* icon_ |
| + | [* icon_note] As you slide the iPod out, small components may snag on the edge of the casing. Move the iPod side to side to clear these components. |
| + | [* icon_note] Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile. |
| [* icon_caution] Be careful not to break the logic board connector off the iPod. The ribbon cable sits at the very top of the connector. |