3. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] We start by removing the clamp screw that holds the two halves of the lightsaber together. |
|---|---|
| - | [* black] Something about the clamp bars. |
| - | [* black] Obi-Wan saw fit to include a charging port on his lightsaber. Lucky for us, he decided to use a standard DC barrel jack connector. |
| + | [* black] We'll get back to that crystal chamber a bit later. For now, we set out to open the saber itself. |
| + | [* black] Let's start by unscrewing this clamp pin that secures the switch housing cover. |
| + | [* black] With the pin removed, we're able to lift the clamp brackets out with no trouble. |
| + | [* icon_note] It seems Obi-Wan saw fit to include a charging port on his lightsaber. Lucky for us, he decided to use a standard DC barrel jack connector. |
| + | [* black] Unscrewing this small retaining ring loosens the port from the housing cover. |