Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Zoe Cagle

Düzenleme onaylandı tarafından Zoe Cagle

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove eight ribbon connectors using the tweezers
-[* green] Four of the ribbon connectors have plastic clamping flaps that cover the ribbon to prevent slippage. Use the tweezers to flip them up before ribbon removal.
- [* icon_caution] Do not flip up the other flaps; they will not lock back down.
+[* red] Using the tweezers, remove the eight ribbon connectors along the sides of the motherboard.
+[* yellow] Four of the ribbon connectors have plastic clamping flaps that cover the ribbon to prevent slippage. Use the tweezers to flip them up before ribbon removal.
+ [* icon_caution] Do ***not*** flip up the other flaps; they are not locks and will break.
[* icon_reminder] When reassembling the device, be sure to flip the ZIF clamps back down.

Resim 1

Önceki resim yok

Eklendi