Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Kobbe Farwick

Düzenleme onaylandı tarafından Kobbe Farwick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Using the tweezers, remove the eight ribbon connectors along the sides of the motherboard.
-[* orange] Four of the ribbon connectors have plastic clamping flaps that cover the ribbon to prevent slippage. Use the tweezers to flip them up before ribbon removal.
+[* orange] Three of the ribbon connectors have plastic clamping flaps that cover the ribbon to prevent slippage. Use the tweezers to flip them up before ribbon removal.
[* icon_caution] Do ***not*** flip up the other flaps; they are not locks and will break.
[* icon_reminder] When reassembling the device, be sure to flip the ZIF clamps back down.
[* icon_note] While the SD card reader is shown as removed in this photo, it is optional for the removal of the motherboard.

Resim 1

Eski Sürüm

Yeni Sürüm