Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Ben Rose

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Using tweezers, gently pull the five marked ribbons out of the ZIF connectors along the sides of the motherboard.
- [* icon_caution] With the exception of the topmost red cable, which has a locking mechanism similar to Step 5, these ZIF connectors are held in place by friction and do ***not*** have locks -- lifting the flaps on these connectors will break them!
+ [* icon_caution] With the exception of the topmost red cable, which has a locking mechanism similar to Step 9, these ZIF connectors are held in place by friction and do ***not*** have locks -- lifting the flaps on these connectors will break them!
[* orange] Three of the ribbon connectors have plastic clamping flaps that cover the ribbon to prevent slippage. Use the tweezers to flip them up before ribbon removal.
[* icon_reminder] When reassembling the device, be sure to flip the ZIF clamps back down.
[* icon_note] While the SD card reader is shown as removed in this photo, it is optional for the removal of the motherboard.