Eşyalarını Tamir Et Topluluk Mağaza

Bu Adımdaki Değişiklikler

Düzenleyen: River Drake —

Düzenleme onaylandı tarafından River Drake

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] After you've unscrewed the four screws connecting the white plastic piece to the casing, you should be able to pull the white plastic piece out directly. If you have trouble, try using the end of a flathead screw driver to pry the piece out of the case. Be gentle during this, as the motherboard can be damaged if you're not.
+[* black] Since you've unscrewed the four screws connecting the white plastic piece to the casing, you should be able to pull the white plastic piece out directly. If you have trouble, try using the end of a flathead screw driver to pry the piece out of the case. Be gentle during this, as the motherboard can be damaged if you're not.
[* black] When you do this, you'll notice the screen and mother/daughter board are attached directly to the plastic piece. All that should be left in the case when you are done is the lens. Congrats! You've reached the motherboard!