10. Adımdaki Değişiklikler
Düzenleyen: randy3833 —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Remove the (2) 9mm Torx screws securing the Faraday cage (looks something like a cheese grater) to the Upper Housing, with a T10 Torxdriver. |
|---|---|
| + | [* black] Then remove the (4) 19mm Torx screws that mount the Drive Carrier to the Upper Housing with a T10 Torxdriver. 2 of the screws are located on the right side of the Drive Carrier near the center and 2 screws are located on left side, near the upper and lower corners. |
Resim 1
Önceki resim yok
Eklendi