12. Adımdaki Değişiklikler
Düzenleyen: Andrew Logan —
Düzenleme onaylandı tarafından Andrew Logan
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Flip up the small circuit board, the LCD should also unfold out of the camera, as pictured. |
|---|---|
| - | [* black] Flip the black retaining clip up (pointed to with an arrow), and disengage the ribbon cable (Red Square). Be careful to not damage the cable. |
| + | [* black] Use pry tool to lift LCD |
| + | [* icon_note] LCD should be attached to ribbon cable. |
| + | [* black] Flip the black retaining clip up (pointed to with an arrow), and disengage the ribbon cable (Red Square). |
| + | [* icon_reminder] Be careful to not damage the cable. |
| + | [* black] Gently pull ribbon cable to remove. |