Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Alejandro Barajas

Düzenleme onaylandı tarafından Alejandro Barajas

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Using the "PH00" size screw driver, unscrew the two five millimeter screws located on the top left and bottom of the LCD screen.
[* black] Screws are located on the main device "left" of the LCD screen.
[* black] Using the same size screw, unscrew the three millimeter screw located in the middle of the joint assembly; attaching the LCD screen to the device.
[* black] Located on the joint.
[* black] Next, unscrew two five millimeter screws located on the left interface of the camera that the LCD screen rests on. Should be located where the USB jacks are.
[* black] Locate the battery assembly and unscrew three screws. (two five millimeter screws and one three millimeter) Located where the battery is inserted.
-[* black] On the bottom of the camera unscrew 5 five millimeter screws from the bottom panel. Removes the bottom panel covering the internal motherboard.

Resim 3

Önceki resim yok

Eklendi