Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Jackie Dupuis

Düzenleme onaylandı tarafından Marty Rippens

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Using the "PH00" size screw driver, unscrew the two five millimeter screws located on the top left and bottom of the LCD screen.
-[* black] Screws are located on the main device "left" of the LCD screen.
-[* black] Using the same size screw, unscrew the three millimeter screw located in the middle of the joint assembly; attaching the LCD screen to the device.
-[* black] Located on the joint.
-[* black] Next, unscrew two five millimeter screws located on the left interface of the camera that the LCD screen rests on. Should be located where the USB jacks are.
-[* black] Locate the battery assembly and unscrew three screws. (two five millimeter screws and one three millimeter) Located where the battery is inserted.
+[* green] Using the Phillips Head #00 size screwdriver, unscrew the two, 5 millimeter screws located on the top left and bottom of the join attaching LCD screen to the device.
+[* blue] Using the same size screw driver unscrew the 3 millimeter screw located in the middle of the joint assembly; attaching the LCD screen to the device.
+[* red] Next, unscrew the two five millimeter screws located on the left interface of the camera that the LCD screen rests on. (Should be located where the USB jacks are.)
+[* black] Locate the battery assembly, on the top of the camera and unscrew three screws; two, 5 millimeter screws and one, 3 millimeter.

Resim 1

Eski Sürüm

Yeni Sürüm