Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Rachel Sparks

Düzenleme onaylandı tarafından Rachel Sparks

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Using the Phillips Head #00 size screwdriver, unscrew the two 5 millimeter screws located on the top left and bottom of the join attaching LCD screen to the device.
-[* orange] Using the same size screw driver unscrew the 3 millimeter screw located in the middle of the joint assembly; attaching the LCD screen to the device.
-[* yellow] Next, unscrew the two five millimeter screws located on the left interface of the camera that the LCD screen rests on. (Should be located where the USB jacks are.)
-[* green] Locate the battery assembly, on the top of the camera and unscrew three screws; two 5 millimeter screws and one 3 millimeter.
+[* red] Unscrew the ***two 5-millimeter screws*** on the top left and bottom and the ***3-millimeter screw*** in the middle of the joint attaching the LCD screen to the device.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Silindi

Resim 3

Silindi