Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Alejandro Barajas

Düzenleme onaylandı tarafından Alejandro Barajas

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Using the "PH00" size screw driver, unscrew the two five millimeter screws located on the top left and bottom of the LCD screen.
+[* black] Screws are located on the main device "left" of the LCD screen.
+[* black] Using the same size screw, take out the three millimeter screw located in the middle of the joint assembly; attaching the LCD screen to the device.
+[* black] Located on the joint.
+[* black] Next, unscrew two five millimeter screws located on the left interface of the camera that the LCD screen rests on. Should be located where the USB jacks are.
+[* black] Locate the battery assembly and unscrew three screws. (two five millimeter screws and one three millimeter) Located where the battery is inserted.
+[* black] On the bottom of the camera remove 5 five millimeter screws from the bottom panel. Removes the bottom panel covering the internal motherboard.