Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Jackie Dupuis

Düzenleme onaylandı tarafından Marty Rippens

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* green] Using the Phillips Head #00 size screwdriver, unscrew the two, 5 millimeter screws located on the top left and bottom of the join attaching LCD screen to the device.
-[* blue] Using the same size screw driver unscrew the 3 millimeter screw located in the middle of the joint assembly; attaching the LCD screen to the device.
-[* red] Next, unscrew the two five millimeter screws located on the left interface of the camera that the LCD screen rests on. (Should be located where the USB jacks are.)
-[* black] Locate the battery assembly, on the top of the camera and unscrew three screws; two, 5 millimeter screws and one, 3 millimeter.
+[* red] Using the Phillips Head #00 size screwdriver, unscrew the two 5 millimeter screws located on the top left and bottom of the join attaching LCD screen to the device.
+[* orange] Using the same size screw driver unscrew the 3 millimeter screw located in the middle of the joint assembly; attaching the LCD screen to the device.
+[* yellow] Next, unscrew the two five millimeter screws located on the left interface of the camera that the LCD screen rests on. (Should be located where the USB jacks are.)
+[* green] Locate the battery assembly, on the top of the camera and unscrew three screws; two 5 millimeter screws and one 3 millimeter.