Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Samuel Lee

Düzenleme onaylandı tarafından Samuel Lee

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Unscrew the two 4.0 mm with a Phillips #00 screwdriver at the top of the camera by the eyepiece.
-[* orange] Also unscrew the one 5.0 mm screw of the dial below the other two screws.
+[* red] Unscrew the two 4.0 mm Phillips #00 screw at the top of the camera by the eyepiece.
+[* orange] Also unscrew the 5.0 Phillips #00 mm screw of the dial below the other two screws.
[* black] Once all the screws are removed, carefully use your hands to detach the back panel from the camera. Working around the edges can help as well.
[* icon_caution] Be careful when pulling the back panel away as it will still be connected to the body of the camera by two strips of film.
[* icon_note] When unscrewing the 5.0 mm screw on the dial, make sure to hold onto the dial that becomes detached after taking out the screw.