Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Düzenleme onaylandı tarafından Walter Galan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] The RAM slots are located in the corner opposite to the cooling fan.
+[* icon_note] To remove existing RAM cards: there are clips holding the sides of each card. Simultaneously spread both right and left clip and the card will pop upward. Then it can easily be pulled out.
[* black] Slide in the RAM at a 45 degree angle.
[* black] Press down on the RAM until it snaps into place.
-[* icon_note] A good amount of pressure is needed to snap it in place.
+[* icon_caution] A good amount of pressure is needed to snap it in place.
[* icon_note] Install the RAM in the left (lower) slot before installing RAM in the right (upper) slot