11. Adımdaki Değişiklikler
Düzenleyen: Ben Eisenman —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Remove the two tiny screws that hold the metal screw plate that is attached attached to the on/off switch |
|---|---|
| [* black] Grasp the metal screw plate attached to the on/off switch and lift slightly up and away from the rear panel. The button should come with the cable. | |
| [* black] Gently peel up the on/off switch ribbon cable. Be sure to pull near where the ribbon cable is glued to the rear panel. |