7. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Repeat this procedure with the next battery cell in. |
|---|---|
| - | [* black] Push the card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive. |
| + | [* black] Repeat this procedure with the adjacent battery cell: |
| + | [* black] Apply a small amount (about 1 ml) of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive. |
| + | [* black] Alternatively, re-heat this section with your iOpener if needed. |
| + | [* black] Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive. |