Eşyalarını Tamir Et Topluluk Mağaza

9. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen —

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert a second plastic opening tool between the far left battery cell and the upper case, cutting adhesive about an inch deep.
-[* black] Gently pry the left-most battery cell up from the upper case.
-[* icon_caution] If you encounter significant resistance, stop and use the iOpener to re-heat the battery cells.
+[* black] Repeat the above procedure to separate the two leftmost battery cells from the upper case.
+ [* black] Remember to apply a small amount (about 1 ml) of adhesive remover to each battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.
+ [* black] Use a second plastic card to separate the two leftmost battery cells from the upper case.