5. Adımdaki Değişiklikler
Adım Satırları
| [title] Removing the EMI shield | |
| [* black] Remove the three Phillips screws securing the EMI shield to the logic board. ( The upper right screw is an aluminum screw which makes it non-magnetic. ) | |
| [* black] Two 1.2mm Phillips Screws | |
| [* black] 1x 1.6mm Phillips non-magnetic Phillips Screws | |
| - | [* black] In order to remove the EMI shield, slightly lift it upward at an angle using tweezers, then slide the EMI shield toward the battery and remove it. |
| + | [* black] In order to remove the EMI shield, slightly lift it upward at an angle using [product|IF145-020|tweezers], then slide the EMI shield toward the battery and remove it. |