Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Dante Mazzanti

Düzenleme onaylandı tarafından Dante Mazzanti


Adım Satırları

[* black] Carefully place a suction cup towards the top edge of the iPad
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
[* icon_caution] Do not pull too hard or you may shatter the glass.
[* black] Place an opening pick in the separation to prevent the adhesive from resealing.