Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Evan Noronha

Düzenleme onaylandı tarafından Evan Noronha

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Slide the pick down along the edge of the iPad, releasingdisplay, towards the adhesive as you go until you reach the top left hand corner of the iPadheadphone jack.
[* black] Slide the pick down along the edge of the iPad, releasingdisplay, towards the adhesive as you go until you reach the top left hand corner of the iPadheadphone jack.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapply the iOpener once again to soften the adhesive.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, as doing so couldcan permanently damage the screendisplay.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, as doing so couldcan permanently damage the screendisplay.
[* icon_note] A good way to avoid this is to never insert the opening pick more than a quarter inch into the iPad.