Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Dante Mazzanti

Düzenleme onaylandı tarafından Dante Mazzanti

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Slide the pick along the edge of the display, towards the headphone jack.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapplyfollow the iOpener once again to soften the adhesiveprocedure and reapply heat.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapplyfollow the iOpener once again to soften the adhesiveprocedure and reapply heat.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
[* icon_note] A rule of thumb is to never insert the opening pick more than a quarter inch into the iPad.