Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

26. Adımdaki Değişiklikler

Düzenleyen: Carlos Oulman

Düzenlenme reddedildi tarafından Carsten Frauenheim

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.
[* red] A pick can be inserted under the logic board just above the battery connector to slightly lift it off the battery connectors.

Resim 3

Önceki resim yok

Eklendi