3. Adımdaki Değişiklikler
Düzenleyen: Donald MacTavish —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_note] If necessary, peel back any tape covering the trackpad cable connector. | |
| [* black] Use the end of a spudger to flip the retaining tab on the ZIF connector. | |
| + | [* black] On reassembly pay attention to the ZIF connector in Step 19 and 20. The Black plastic retaining bar MUST be in the “up/open” position to remove and reinstall the ribbon cable. Once the cable is reseated "close" the black retainer bar by carefully flipping down with a motion away from the cable. |