Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Zachary Pyle

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert wisdom here.
+[* black] Unsnap small ribbon cable connected to keypad by flipping up the black plastic snap and gently pulling out the ribbon cable using tweezers.
+[* black] Remove screw on left side of circuit board above ribbon cable (0.124 in long; use Phillips 00 attachment) with screen facing down and charger pointed towards you).
+[* icon_caution] WARNING: Do not over-tighten during reassembly.