2. Adımdaki Değişiklikler
Düzenleyen: Mike Shaw —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Unsnap small ribbon cable connected to keypad by flipping up the black plastic snap and gently pulling out the ribbon cable using tweezers. | |
| - | [* black] Remove screw on left side of circuit board above ribbon cable (0.124 in long; use Phillips 00 attachment) with screen facing down and charger pointed towards you). |
| - | [* icon_caution] WARNING: Do not over-tighten during reassembly. |