Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

11. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the card and re-insertagain slide it underneathunder the centertop edge of the battery, starting from top. Slidenear the card in as far as it will go, breaking up as much adhesive as you cancenter.
[* black] Remove the card and re-insertagain slide it underneathunder the centertop edge of the battery, starting from top. Slidenear the card in as far as it will go, breaking up as much adhesive as you cancenter.
[* icon_caution] Be extremely careful to slide the card '''over''' the front-facing camera and headphone jack cables to avoid cutting them.
[* black] Slide the card in as far as it will go, breaking through as much of the adhesive as you can.
[*
black] Lift up on the card to pry the second battery cell up from the rear case.
[* black] Slide the card in as far as it will go, breaking through as much of the adhesive as you can.
[*
black] Lift up on the card to pry the second battery cell up from the rear case.
[* icon_note] If there is significant resistance from the battery when you try to pry it up, reheat the adhesive with an iOpener and repeat the previous 3 steps to break apart the adhesive as necessary.