Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Twist the opening pick to fully dislodge the battery and remove it.
[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
-[* icon_reminder] To install a new battery:
+[* icon_reminder] To install a new battery and ensure that is is properly aligned:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
- [* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
- [* black] Press the battery firmly into place for 5-10 seconds.
+ [* black] Lay the replacement battery in place, but do not apply adhesive yet. Resume re-assembly until the motherboard is in place ([guide|47480|STEP 18|stepid=110678|new_window=true]).
+ [* black] Apply new pre-cut adhesive or double-sided tape onto the phone frame, around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
+ [* black] ''Temporarily'' connect the battery connector to the motherboard to ensure proper battery alignment.
+ [* black] Press the battery firmly into place for 5-10 seconds. Disconnect the battery and resume re-assembly.