Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: car ramrod —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* blue] Simultaneously push the gray tab gently toward the memory card slot and lift up the black battery cover.
+[* blue] While pulling the grey tab towards the back of the camera, lift the black section of the battery cover up.
[* red] Use the Phillips head screwdriver, rotating counter clockwise to remove the two screws on either side of the battery slots and set them aside.
+[* black] When reassembling the camera, make sure that the grey part of the battery cover is underneath the two halves of the camera casing. The black cover should fit over the empty space where the batteries go and the holes for the screws should line up with the holes in the casing. You may need to pull the green part of the inside of the camera away from the grey tab in order to move the battery cover into place.