4. Adımdaki Değişiklikler
Düzenleyen: Patricia Hubbert —
Düzenleme onaylandı tarafından Patricia Hubbert
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* blue] While pulling the grey tab towards the back of the camera, lift the black section of the battery cover up. |
|---|---|
| - | [* red] Use the Phillips head screwdriver, rotating counter clockwise to remove the two screws on either side of the battery slots and set them aside. |
| - | [* black] When reassembling the camera, make sure that the grey part of the battery cover is underneath the two halves of the camera casing. The black cover should fit over the empty space where the batteries go and the holes for the screws should line up with the holes in the casing. You may need to pull the green part of the inside of the camera away from the grey tab in order to move the battery cover into place. |
| + | [* black] Pull the grey tab towards the back of the camera. Lift the black section of the battery cover up, exposing the battery slots. |
| + | [* black] Use the'' Phillips head screwdriver'', rotating counter clockwise to remove the two screws on either side of the battery slots. Set the screws aside. |
| + | [* icon_caution] When reassembling the camera it is important that the holes for the screws on either side of the battery slots align properly with the'' interior ''of the camera body. |
| + | [* icon_caution] When reassembling the camera the black section of the battery cover must lie flat over the battery slots and be held in place by the grey tab. You may have to pull the green part of the ''inside'' of the camera away from the grey tab in order to move the battery cover into place. |