Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Walter Galan —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.
[* icon_caution] Be careful not to break any components off the surrounding area on the logic board as you prypry upwards.
[* icon_caution] Be careful not to break any components off the surrounding area on the logic board as you prypry upwards.
[* black] Remove the rear camera from the iPhone.
[* blackicon_reminder] Before reassembly, be sure to clean all metal-to-metal contact points on the rear camera ('''not''' the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.
[* blackicon_reminder] Before reassembly, be sure to clean all metal-to-metal contact points on the rear camera ('''not''' the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.