Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: davec2468

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Open the battery cover.
-[* icon_note] To open, push the black slide to the right, then pull the cover down.
-[* black] Unscrew three Phillips screws inside of the battery case using the #00 screwdriver that also hold on the top panel. They are 7.4 mm, 4.9mm, and 4.9 mm from left to right.
-[* icon_reminder] Remember to remove the batteries to get to the screws.
+[* black] Open the battery compartment door by sliding the latch to the right and pulling the door down.
+[* black] Remove the batteries from the compartment.
+[* black] Unscrew the three Phillips screws (shown) located inside the battery compartment.