Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

1. Adımdaki Değişiklikler

Düzenleyen: Abagayle Serreyn

Düzenleme onaylandı tarafından Abagayle Serreyn

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Dig down to pipe fitting
[*
black] Dig down and around the bustedbroken sprinkler extension to gain access to the pipe fitting
[* black] Dig down to pipe fitting
[*
black] Dig down and around the bustedbroken sprinkler extension to gain access to the pipe fitting
[* icon_note] The pipe fitting is usually about one foot under ground
[* black] The hole should be at least 6 inches in diameter, or widewide enough to turn pliers/pliers or crescent wrench 360 degrees aroundaround the sprinkler extension
[* icon_note] Make sure to keep the excess dirt in one location because it will be reused later to refill the hole

[* icon_caution] Do not be too forceful with the shovel when digging to the pipe fitting. If you slam the shovel into the dirt too hard and hit the piping, you mayDigging forcefully could damage the pipeline.
[* icon_caution] Watch out for ants or other hazardous insects when digging. Raid or some other form of insect repellent may be needed.
[*

[*
black] OnceRemove dirt with the pipe fitting is located, use a gardening shoveltrowel to scoop out any additional dirt aroundmake the pipe fitting so that it is clearly visibleaccessible.
[* black] The hole should be at least 6 inches in diameter, or widewide enough to turn pliers/pliers or crescent wrench 360 degrees aroundaround the sprinkler extension
[* icon_note] Make sure to keep the excess dirt in one location because it will be reused later to refill the hole

[* icon_caution] Do not be too forceful with the shovel when digging to the pipe fitting. If you slam the shovel into the dirt too hard and hit the piping, you mayDigging forcefully could damage the pipeline.
[* icon_caution] Watch out for ants or other hazardous insects when digging. Raid or some other form of insect repellent may be needed.
[*

[*
black] OnceRemove dirt with the pipe fitting is located, use a gardening shoveltrowel to scoop out any additional dirt aroundmake the pipe fitting so that it is clearly visibleaccessible.