40. Adımdaki Değişiklikler
Düzenleyen: Amber Kriech —
Düzenleme onaylandı tarafından Amber Kriech
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] When putting your flute back together, some keys may seem either too easy or to hard to press. This is related to the tightness of the screws in the rails as well as small screws between finger keys that have yet been mentioned. |
|---|---|
| - | [* icon_note] The tighter the screw, the more finger keys will resist |
| + | [* black] When putting your flute back together, some keys may seem either too easy or to hard to press. This is related to the tightness of the screws in the rails, as well as small screws between finger keys that have not yet been mentioned. |
| + | [* icon_note] The tighter the screw, the more finger keys that will resist being closed. |
| [* red] To adjust the G# lever, change the tightness in the corresponding screw in the railing. | |
| [* orange] To adjust the inline G keys, play with the screw in the attached rail on top of the G# lever railing. | |
| [* icon_reminder] The B tab on the other side of the flute is also adjusted in this fashion. | |
| [* yellow] This screw, as well as the next two screws in this step, do not hold anything together. They act as modifiers that adjust the synchronization of connected keys not attached to a rod backbone. | |
| [* green] This alters the F and F# pair. | |
| [* light_blue] This screw changes the coordination of the D and F# keys. |