2. Adımdaki Değişiklikler
Düzenleyen: Clay Eickemeyer —
Düzenleme onaylandı tarafından Clay Eickemeyer
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Disconnect the camera cable from the logic board. | |
| - | [* black] The camera cable is connected parallel to the board, and has two metal sides. If using two spudgers, push on the two metal parts horizontally, parallel to the board, until the cable comes out. If using one spudger, alternate pushing each side. |
| - | [* icon_caution] Do not pull on the camera cable. Pulling on the camera cable will likely tear out the wires from the connector. |
| + | [* icon_note] The camera cable lifts straight away from the logic board. If your cable feels fragile, use a spudger to pry up on the small metal tabs on each side of the connector head to disconnect the cable. |