2. Adımdaki Değişiklikler
Düzenleyen: Person38 —
Düzenleme onaylandı tarafından Clay Eickemeyer
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Disconnect the camera cable from the logic board. | |
| - | [* icon_caution] Pull the cable parallel to the face of the logic board. Pulling the cable upward may damage the logic board or the cable itself. |
| + | [* black] The camera cable is connected parallel to the board, and has two metal sides. If using two spudgers, push on the two metal parts horizontally, parallel to the board, until the cable comes out. If using one spudger, alternate pushing each side. |
| + | [* icon_caution] Do not pull on the camera cable. Pulling on the camera cable will likely tear out the wires from the connector. |