Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: johnsawyercjs

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the following 3 screws:
- [* red] One 11 mm Phillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
+ [* red] One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out.
[* icon_reminder] The shorter of the three screws goes in the middle.