Eşyalarını Tamir Et Topluluk Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: johnsawyercjs —

Düzenleme onaylandı tarafından Alex Diaz-Kokaisl

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] There's a trackpad and keyboard ribbon cable connecting the upper case to the logic board, so don't pull the upper case off entirely just yet.
-[* black] Starting near the display and working around to the front of the computer, pry up on the upper case. A [product|IF145-000|plastic opening tool], expired plastic credit or similarly-thick card, or a medium hard guitar pick may help you to do this.
-[* icon_note] The upper case is likely to stick at the connection above the front edge of the optical drive. If this happens, first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening.
-[* icon_note] If you stand the base on end to get a better look, you may displace the four grey plastic clips that hold the right side of the upper case in place. Don't panic. They slide into slots at the top rightmost edge of the lower frame, above the front edge of the optical drive.
-[* icon_reminder] During reassembly, make sure the clips on the right side click firmly into place. They're different from the clips on the left side, and so normally they require a little more pressure to click into place more firmly.
+[* black] Starting at the upper left corner of the upper case, near the display, working around to the front of the computer, pry up on the upper case. A [product|IF145-000|plastic opening tool], expired plastic credit or similarly-thick card, or a medium hard guitar pick may help you to do this.
+[* icon_note] The upper case is likely to stick at its connection above the front edge of the optical drive. If this happens, first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening. Here again, inserting a plastic card, guitar pick, etc. can be useful.
+[* icon_note] If you stand the base of the MacBook on one end to get a better look, you may displace the four grey plastic clips that hold the right side of the upper case in place. Don't panic. They slide into slots at the top rightmost edge of the lower frame, above the front edge of the optical drive.
+[* icon_reminder] During reassembly, make sure the clips on the right side, above the optical drive, click firmly into place. They're different from the clips on the left side, and so normally they require a little firmer pressure to click into place.