Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: johnsawyercjs

Düzenleme onaylandı tarafından Alex Diaz-Kokaisl

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Disconnect the newly revealed display data cable. If there is no pull-tab on the top of the connector, it may be helpful to use a spudger to disconnect this connector.
+[* black] Disconnect the newly revealed display data cable's plug from the logic board, by pulling it upward using its black pull-tab. If there is no pull-tab on top of the plug, it may be helpful to use a spudger to disconnect this plug.