5. Adımdaki Değişiklikler
Düzenleyen: Barry —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] There are two clips that hold the ribbon cable in place. To release them push them forwards towards the keyboard. The ribbon should then slide out without resistance. | |
| - | [* black] At this point you should disconnect the touchpad. The cable is on the |
| + | [* black] At this point you should disconnect the touchpad. The cable is on the left (highlighted orange). |
| [* black] To disconnect the touchpad raise the black bar. There is a clear tab with the label MB stuck on it. Use this to pull the cable from the board. Once again there should be no resistance. |