Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: redacted

Düzenleme onaylandı tarafından redacted

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert the flat edge of the spudger into the crease of the keyboard cover.
-[* black] While the spudger is in the crease, pry open the entire perimeter of the casing.
+[* black] While the spudger is in the crease, carefully pry open the casing by sliding the spudger along the edge.
+[* icon_note] Do not use excessive force to pry open the lid. You should hear each plastic clip snap open as you run the spudger along the edge.