Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Andrea Tobar

Düzenleme onaylandı tarafından Andrea Tobar

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Unscrew the two silver 1.2 mm Phillips #000 screws on opposing sides in the lens ring area.
+[* red] Unscrew the 2 silver 1.2 mm Phillips #000 screws on opposing sides in the lens ring area.
[* black] With fingers, easily pull off lens housing. This will complete the removal of the E-mount.
[* orange] Note that a gray lens release button and small spring underneath will loosely be sitting in place and can easily fall out if camera is moved.