Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Adam Walder

Düzenleme onaylandı tarafından Adam Walder

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Start at the center and insert the spudger into the crevice between the back plastic casing and the keyboard,
-[* black] Gently slide the spudger along the entire parameter of the device to pry the casing loose and unhook six clips
-[* icon_note] Do not be alarmed if you feel a gentle tug or hear a click as you slide your spudger. They indicate the clips being unhooked from the casing.
+[* black] Start at the center and insert the spudger into the crevice between the back plastic casing and the keyboard.
+[* black] Gently slide the spudger along the entire perimeter of the device to pry the casing loose and unhook six clips.
+[* icon_note] Do not be alarmed if you feel a gentle tug or hear a click as you slide your spudger. These sounds are the clips detaching from the casing.