7. Adımdaki Değişiklikler
Düzenleyen: fadi abboud —
Düzenleme onaylandı tarafından fadi abboud
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] This step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting. | |
| - | [* red] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them. |
| - | [* black] When all three cables are removed, lift the hood away from the printer and set it aside. |
| + | [* red] Now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them. |
| [* black] When all three cables are removed, lift the hood away from the printer and set it aside. |