7. Adımdaki Değişiklikler
Düzenleyen: James Dartt —
Düzenleme onaylandı tarafından James Dartt
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] This step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting. |
|---|---|
| - | [* red] Remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them. |
| - | [* black] When all three cables are removed, lift the hood away from the printer and set it aside. |
| + | [* icon_note] With a partner's help: |
| + | [* black] Have one person lift the hood 2-3 inches. |
| + | [* red] Have the other person disconnect the three cables from the motherboard (the green PCB) to the hood by gently pulling upward on them. |
| + | [* black] Remove the hood completely. |